Eve library

Galatea Domain -- Product Capabilities

Guide

Revision 1

On this page

Canonical source: the canonical features document for this domain is deep-dive/features.md, rendered in the docs center. This file is its operational companion (service topology, APIs, schemas, runtime detail) — reconciled by linking, not duplicated (§2, §13).

Comprehensive robotics, kinematics, and fashion robotics infrastructure for building humanoid robot systems that operate in retail, entertainment, and fashion environments.


Table of Contents#


Core Robotics Framework#

The foundational layer providing shared types, constants, utilities, and error definitions used across every Galatea library. All robot configurations, coordinate frames, joint representations, and error codes originate here.

Capability Description
Coordinate frame types Standardized 3D coordinate frame definitions for consistent spatial reasoning across all robot components
Joint angle representations Unified joint angle data structures supporting revolute, prismatic, and continuous joints
Robot configuration schemas Zod-validated configuration schemas for defining robot morphology, joint limits, and operational parameters
Error code system Comprehensive error code taxonomy covering kinematics failures, hardware faults, safety violations, and communication errors
Configuration management Centralized configuration system with validation, defaults, and runtime override support

Kinematics and Dynamics#

Advanced computational kinematics for solving the spatial relationships between robot joints and end effectors, enabling precise motion control.

Forward and Inverse Kinematics#

Capability Description
Forward kinematics (FK) Compute end effector position and orientation from joint angles using Denavit-Hartenberg parameter chain evaluation
Analytical inverse kinematics Closed-form IK solutions for common kinematic configurations, providing fast and exact joint angle computation
Numerical IK solvers Multiple numerical IK methods: Jacobian transpose, damped least squares (Levenberg-Marquardt), and Cyclic Coordinate Descent (CCD) for arbitrary kinematic chains
Redundancy resolution Handle kinematic redundancy in humanoid robots by optimizing null-space objectives (posture, obstacle avoidance, energy minimization)
Workspace analysis Compute reachable workspace boundaries for any kinematic chain configuration

Dynamics and Forces#

Capability Description
Recursive Newton-Euler dynamics Compute joint torques required for any desired motion trajectory using recursive Newton-Euler algorithm
Inertia tensor computation Calculate link inertia tensors for dynamic motion planning and control
Torque calculation Determine the torques needed at each joint to achieve desired accelerations, accounting for gravity, Coriolis, and centrifugal forces
Gravity compensation Calculate gravity compensation torques for holding positions and smooth motion

Collision and Safety Geometry#

Capability Description
Swept volume collision detection Detect collisions along planned trajectories using swept volume analysis
Self-collision checking Prevent robot self-collision by checking link proximity during motion planning
Safety margin computation Calculate minimum clearance distances between robot links and obstacles
Collision-free path planning Plan trajectories that avoid obstacles while satisfying joint limits and smoothness constraints

Supporting Computations#

Capability Description
Jacobian computation Compute geometric and analytical Jacobian matrices for velocity-level control and singularity analysis
URDF/XACRO parser Parse standard URDF and XACRO robot description files to construct kinematic chain models
Singularity detection Identify and manage kinematic singularities through condition number monitoring and damping

Hardware Abstraction#

A unified interface layer that abstracts physical robot hardware, enabling the same control software to run on different robot platforms.

Joint and Actuator Control#

Capability Description
Standardized joint interface Unified command/feedback API that works across DC motors, servo motors, BLDC motors, and series elastic actuators
Actuator profiles Characterization profiles for each actuator including torque curves, speed limits, thermal limits, and backlash measurements
Position/velocity/torque modes Support for position control, velocity control, and torque control modes on any actuator

Sensor Fusion#

Capability Description
Multi-sensor fusion Fuse data from IMUs, joint encoders, force/torque sensors, and vision systems into a coherent state estimate
State estimation Real-time robot state estimation combining proprioceptive and exteroceptive sensor data
Noise filtering Kalman and complementary filtering for sensor noise reduction

Body Systems#

Capability Description
Body morphing Configure body dimensions for different robot platforms through parameterized morphology
Facial expression system Control facial expression actuators (eyes, mouth, eyebrows) for emotional communication
Dexterous hand control Finger-level articulation control for object manipulation and gesture expression
Tactile skin sensing Process capacitive tactile skin sensor arrays for contact detection and force mapping
RFID reader interface Read RFID tags for garment identification and inventory tracking

Thermal Management#

Capability Description
Motor temperature monitoring Real-time thermal monitoring of all motor actuators
Thermal throttling Automatic performance throttling when actuators approach thermal limits
Electronics cooling Monitor and manage electronics cooling systems

Bipedal Locomotion#

Walk, run, and navigate through complex environments with stable bipedal locomotion.

Gait Planning#

Capability Description
Walking gait generation Generate stable walking gaits at configurable speeds and step lengths
Running gait generation Dynamic running gait patterns with aerial phases
Configurable walking styles Parameterize walking style for pace, elegance, energy efficiency, and personality expression
Terrain-adaptive gaits Adjust gait parameters based on terrain type (smooth floor, carpet, ramp, uneven surface)

Balance and Stability#

Capability Description
ZMP balance control Zero Moment Point-based balance maintenance ensuring stability during locomotion
Center of pressure tracking Real-time center of pressure monitoring for stability assessment
Push recovery Recover from external disturbances using stepping strategies, hip strategies, and ankle strategies
Dynamic balance Maintain balance during dynamic motions (reaching, turning, carrying objects)
Capability Description
Footstep planning Plan optimal footstep sequences while avoiding obstacles
Stair navigation Ascend and descend stairs with terrain estimation and step adaptation
Obstacle avoidance Dynamically avoid obstacles detected during locomotion
Path following Follow planned paths with smooth trajectory tracking

Whole-Body Motion Control#

Coordinate the entire robot body for natural, fluid movements that combine locomotion, manipulation, and balance.

Capability Description
Task-space control Control end effectors in Cartesian space while the controller handles joint-level coordination
Impedance control Variable impedance control for compliant interaction -- the robot yields naturally to external forces
Admittance control Force-to-motion control enabling safe physical human-robot interaction
Postural control Maintain a desired posture during task execution using null-space optimization
Center of mass control Track and regulate the center of mass for whole-body stability during any motion
Angular momentum control Regulate angular momentum for dynamic motions (turning, reaching, recovery)

Computer Vision and Perception#

See and understand the environment through cameras and depth sensors, enabling autonomous operation in retail and fashion spaces.

People and Audience#

Capability Description
Person detection Detect people in the robot's field of view with pose estimation
Person tracking Track individuals over time as they move through the space
Audience awareness Detect audience presence, estimate group size, and track attention levels
Engagement estimation Estimate audience engagement based on gaze direction, proximity, and dwell time

Garment and Fashion#

Capability Description
Garment recognition Classify garment type, color, pattern, and style from camera images
Fit analysis Analyze garment fit on the robot or mannequin using visual measurement
Fashion trend analysis AI-powered analysis of fashion trends from visual data

Environment and Navigation#

Capability Description
SLAM Simultaneous Localization and Mapping for building and maintaining maps of indoor retail environments
Obstacle detection Detect static and dynamic obstacles for safe navigation
Depth processing Process depth camera data (Intel RealSense, ZED) for 3D scene understanding
Visual servoing Image-based and position-based visual servo control for precise alignment and manipulation

Camera Systems#

Capability Description
Camera-only perception Full perception pipeline using only RGB cameras, without requiring LiDAR or depth sensors
Attention prediction Predict where the robot should look next based on scene understanding

AI and Robot Intelligence#

The intelligence layer that enables autonomous behavior, natural motion, and meaningful human interaction.

Foundation Models#

Capability Description
Vision-Language-Action runtime Run VLA models that take visual observations and language instructions and output motor actions
VLA fine-tuning pipeline Fine-tune VLA models on robot-specific data for improved task performance
Large Behavior Model Foundation behavior model fine-tuning for complex, long-horizon task execution
LBM evaluation suite Systematic evaluation of large behavior model performance across tasks
Motor cortex policy Motor cortex-inspired hierarchical control policies for coordinated multi-joint motion

Behavioral Systems#

Capability Description
Behavioral engine Finite state machine and behavior tree execution for structured robot behavior management
Natural motion generation Generate natural-looking motions from high-level descriptions (e.g., "wave hello", "present garment")
Emotion expression Generate and modulate emotional expressions through facial features, body posture, and gesture timing
Customer engagement Manage multi-turn customer interactions with dialog management and context awareness
LLM interaction Integrate large language models for conversational ability and knowledge-based responses

Learning and Training#

Capability Description
Reinforcement learning RL training infrastructure for learning locomotion, manipulation, and interaction policies
End-to-end neural control End-to-end neural network control policies that map directly from sensory input to motor output
Quiet locomotion Noise-minimized locomotion policy optimization for quiet operation in retail environments
Data collection Systematically collect robot experience data for training and evaluation
Training infrastructure Distributed training infrastructure for large-scale robot learning
Simulation farm management Manage fleets of simulation instances for parallel policy training

Remote Operation#

Capability Description
Teleoperation Remote teleoperation interface with force feedback and video streaming
VR teleoperation VR headset-based teleoperation with intuitive motion mapping
Sensor suit integration Capture human motion from sensor suits for teleoperation and motion demonstration

Fashion Intelligence#

Capability Description
Fashion trend AI Analyze runway trends, social media fashion data, and customer preferences for trend-informed behavior
Attention prediction Predict which items or displays will attract customer attention

Safety and Compliance#

ISO 13482 compliant safety systems ensuring robots operate safely alongside humans in public spaces.

Standards Compliance#

Capability Description
ISO 13482 compliance Full compliance checking against the ISO 13482 personal care robot safety standard
Risk assessment Automated risk assessment with hazard identification, risk estimation, and risk evaluation
Regulatory toolkit Generate regulatory compliance documentation for CE marking, UL certification, and other market-specific requirements

Real-Time Safety#

Capability Description
Force and torque limiting Real-time force and torque limiting to prevent injury during human-robot contact
Emergency stop system Hardware and software emergency stop with safe state transition guarantees
Functional safety monitoring Continuous functional safety monitoring with watchdog timers and heartbeat checking
Safe state transitions Defined safe states that the robot enters on any safety violation

Operational Safety#

Capability Description
Safety-critical audit logging Tamper-resistant audit logging of all safety-critical events
Access control Physical and logical access control for robot operations (operator authentication, maintenance locks)
Alarm management Prioritized alarm management with escalation policies

Robot Communication#

Network protocols for robot-to-robot coordination and cloud connectivity.

Capability Description
EtherCAT master Industrial EtherCAT fieldbus master for deterministic real-time motor control communication
CAN FD interface CAN FD bus interface for communication with embedded sensors and actuators
DDS bridge Data Distribution Service bridge for ROS 2 interoperability
WiFi mesh networking Mesh network for multi-robot coordination without infrastructure dependency
Cloud connector Cloud platform connectivity for telemetry upload, software updates, and remote monitoring
IEEE 1588 PTP sync Precision Time Protocol synchronization across all robots for coordinated timing

Firmware Management#

Low-level firmware abstraction and management for robot electronics.

Capability Description
Motor driver firmware Interface with BLDC, stepper, and servo motor driver firmware
Sensor firmware protocols Sensor communication over SPI, I2C, and UART protocols
Safety controller firmware Hardware safety controller firmware interface for independent safety monitoring
Power management Battery management, power distribution, and charging control
RTOS runtime Real-time operating system runtime interface for deterministic task scheduling
Secure bootloader Secure bootloader with firmware update authentication and rollback protection
Board support packages BSPs for target hardware platforms enabling cross-platform firmware deployment

Choreography and Shows#

Design, rehearse, and execute synchronized multi-robot performances with lighting, music, and stage effects.

Show Design#

Capability Description
Visual show designer Visual timeline editor with keyframe-based motion design for creating choreographed sequences
Show DSL Domain-specific scripting language for programmatic show authoring with loops, conditionals, and synchronization primitives
Formation engine Plan multi-robot formations and smooth transitions between formations
Stage mapper Map stage geometry including runway dimensions, obstacle locations, and robot staging positions

Synchronization#

Capability Description
Music synchronization Beat detection and music tempo synchronization for rhythm-aligned robot motion
Lighting bridge DMX and ArtNet lighting control integration for coordinated robot-light shows
Timing engine Sub-millisecond timing coordination across multiple robots and effects systems

Production#

Capability Description
Rehearsal engine Preview shows in simulation with collision checking before running on physical robots
Show scheduler Schedule shows with maintenance window management, battery charge planning, and wardrobe changes
Multi-robot coordination Orchestrate multiple robots performing different roles in a single choreographed show

Fleet Management#

Manage, monitor, and maintain fleets of robots deployed across multiple locations.

Operations#

Capability Description
Task orchestration Allocate tasks across robots based on availability, capability, and location
Scheduling engine Schedule robot shifts, shows, maintenance, and charging with conflict resolution
Capacity planning Forecast fleet capacity needs based on demand patterns and growth projections

Monitoring and Maintenance#

Capability Description
Health monitoring Real-time health dashboards for every robot including motor temperatures, battery levels, and error rates
Remote diagnostics Diagnose robot issues remotely through log analysis, sensor data inspection, and interactive debugging
Incident management Track and resolve robot incidents with severity classification, root cause analysis, and resolution workflows
OTA updates Over-the-air firmware and software updates with staged rollout and automatic rollback

Business Operations#

Capability Description
RaaS billing Robotics-as-a-Service usage metering and billing for leased robot fleets
Federated learning Share learned behaviors across the fleet while keeping raw data local through federated learning
Digital nervous system Fleet-wide telemetry aggregation with anomaly detection and trend analysis

Garment and Fashion Management#

Manage, track, and handle clothing and costumes for fashion robot deployments.

Garment Tracking#

Capability Description
Outfit tracking RFID and vision-based tracking of every garment's location, status, and assignment
Digital product passport Digital provenance records for garments including materials, manufacturing, and ownership history
Wardrobe scheduling Schedule outfit rotations for fashion shows and retail displays with change-time accounting

Garment Handling#

Capability Description
Cloth manipulation Robotic cloth grasping, folding, and dressing assistance using learned manipulation policies
Quick-change mechanisms Rapid outfit change sequencing with mechanical quick-change systems
Fit validation Validate garment fit against robot body measurements before show time
Size adaptation Adapt garments to different robot body configurations through adjustable mounting systems

Fabric Safety#

Capability Description
Tear detection Detect fabric tears and damage before they worsen during shows
Sharp edge avoidance Ensure robot hardware does not have exposed edges that could damage garments
Fabric compatibility Assess fabric types for compatibility with robot motion and quick-change mechanisms

Pose Engine#

Generate, optimize, and manage humanoid poses for natural and expressive robot presence.

Pose Generation#

Capability Description
Contrapposto solver Calculate classical contrapposto poses for natural, asymmetric standing positions
Breathing simulator Generate subtle breathing motion for lifelike presence when the robot is stationary
Micro-movement generation Generate small, continuous micro-movements to prevent the robot from appearing frozen or mechanical
Hand pose library Pre-defined hand gesture and pose library for communication and fashion presentation

Pose Management#

Capability Description
Full-body pose library Curated library of full-body poses including fashion model poses, greeting poses, and presentation poses
Pose optimizer Optimize poses under joint limit and stability constraints to find feasible configurations
Pose validation Validate pose safety and physical feasibility before execution
Transition planner Plan smooth, natural trajectories between poses with configurable interpolation

Simulation and Digital Twin#

Test, preview, and monitor robots in simulation before and during physical deployment.

Physics Simulation#

Capability Description
Rigid body physics Full rigid body physics simulation for testing robot dynamics
Cloth simulation Simulate fabric behavior for garment fitting and motion planning
Wear simulation Simulate garment wear and tear over time for maintenance planning

Digital Twin#

Capability Description
Real-time digital twin Mirror the physical robot state in a digital twin in real-time for monitoring and debugging
Show preview Preview choreographed shows in simulation before physical rehearsal
Virtual showroom Customer-facing virtual showroom for remote demonstrations

Training and Testing#

Capability Description
RL training environment OpenAI Gym-compatible training environment for reinforcement learning policy development
Automated scenario testing Run automated test scenarios for safety validation and regression testing
Domain randomization Randomize simulation parameters for robust policy training

Analytics and Business Intelligence#

Measure the business impact of robot deployments with engagement tracking, revenue attribution, and operational analytics.

Capability Description
Engagement tracking Track customer engagement duration, interaction count, and engagement quality per robot and per shift
A/B testing A/B test robot behaviors (greeting style, motion speed, expression intensity) to optimize engagement metrics
Traffic heatmaps Generate store traffic heatmaps from robot sensor data to inform store layout decisions
POS integration Integrate with point-of-sale systems to correlate robot interactions with purchases
Inventory bridge Connect to retail inventory systems for stock-aware robot behavior
Revenue attribution Model the revenue impact of robot interactions using multi-touch attribution
Reporting dashboard Aggregate analytics into executive reporting dashboards with customizable KPIs

Developer SDK#

TypeScript client SDK for external developers building on the Galatea platform.

Capability Description
Robot control client TypeScript client for sending commands to robots (motion, speech, expression)
Telemetry access Real-time telemetry data streaming from robots
Show management API API for creating, scheduling, and triggering choreographed shows
Analytics SDK Access engagement and business analytics data programmatically
Show SDK Purpose-built SDK for show designers and choreographers

Database and Persistence#

Specialized data stores for robotics-specific data.

Capability Description
Pose store Persistent storage for pose libraries with search and versioning
Event store Event sourcing store for robot lifecycle events
Telemetry store Time-series storage for high-frequency telemetry data
Garment store Garment inventory and tracking data persistence
Show store Show definitions, schedules, and performance records

Inclusivity and Accessibility#

Design robots that represent and serve diverse audiences across cultures, body types, and abilities.

Capability Description
Accessibility adaptations Adapt robot behavior for visitors with different abilities (wheelchair users, visually impaired, hearing impaired)
Body profile configurations Configure diverse body proportions representing different body types, sizes, and morphologies
Cultural customizations Adapt greetings, gestures, personal space, and interaction style for different cultural markets
Multilingual support Multi-language support for spoken interactions, signage, and customer communication

Event Processing#

Structured event handlers for processing robot system events in real-time.

Capability Description
Robot status events Process robot status changes (online, offline, error, maintenance, performing)
Safety events Handle safety system events (emergency stop triggered, force limit exceeded, obstacle detected)
Garment events Track garment interactions (outfit change started, fit validated, garment damaged)
Show events Manage show performance events (show started, formation reached, music cue hit, show ended)
Customer interaction events Log customer interaction events (greeting initiated, question asked, purchase attributed)

Capability Summary Tables#

Motion Control Stack#

Layer Component Key Capability
Planning Kinematics FK/IK solving, Jacobian computation, collision avoidance
Planning Locomotion Gait generation, footstep planning, stair navigation
Control Whole-Body Control Task-space control, impedance control, balance regulation
Control Pose Engine Pose optimization, transition planning, micro-movements
Execution Hardware Abstraction Joint interface, sensor fusion, motor control
Execution Firmware Motor drivers, sensor protocols, safety controllers

AI and Intelligence Stack#

Layer Component Key Capability
Foundation VLA Runtime Vision-language-action model inference and fine-tuning
Foundation Large Behavior Model Complex, long-horizon task execution
Behavior Behavioral Engine FSM and behavior tree execution
Behavior Natural Motion Gen Generate motions from text descriptions
Learning Reinforcement Learning Policy learning in simulation and real world
Learning Training Infrastructure Distributed training, simulation farms
Interaction Customer Engagement Dialog management, context tracking
Interaction Emotion Expression Facial expression, body language, gesture timing

Safety Framework#

Aspect Mechanism Standard
Force safety Real-time force/torque limiting ISO 13482
Emergency response Hardware and software E-stop with safe state transitions IEC 60204
Collision prevention Swept volume analysis, self-collision checking ISO 13482
Functional safety Watchdog timers, heartbeat monitoring IEC 61508
Audit Tamper-resistant safety event logging ISO 13482
Access control Operator authentication, maintenance locks ISO 13482

Communication Protocols#

Protocol Purpose Real-Time Use Case
EtherCAT Motor control Sub-millisecond Joint-level control loop
CAN FD Embedded devices Millisecond Sensor and actuator communication
DDS ROS 2 interop Configurable Module-to-module data sharing
WiFi Mesh Multi-robot Best-effort Fleet coordination and telemetry
IEEE 1588 PTP Time sync Microsecond Synchronized multi-robot choreography
Cloud Remote ops Best-effort Telemetry upload, OTA updates

Deployment Model#

Scenario Key Capabilities Used
Fashion show Choreography, garment management, formation engine, lighting bridge, music sync
Retail greeting Customer engagement, person detection, LLM interaction, emotion expression
Store display Pose library, micro-movements, breathing simulation, outfit tracking
Interactive demo VLA runtime, natural motion gen, speech interaction, visual servoing
Fleet operation Task orchestration, health monitoring, OTA updates, RaaS billing
Training data collection Teleoperation, data collection, simulation, federated learning