Eve library

IoT Setup Guide

Guide

Revision 1

On this page

Demeter turns soil, climate, and weather sensors into automatic care. This guide covers pairing devices, watching their data, and getting alerted — the foundation for automation.

Pair a sensor#

  1. Go to Sensors → Pairing (/sensors/pairing).
  2. Choose how the device connects:
    • Direct protocol — MQTT, Zigbee, Z-Wave, Matter/Thread, Wi-Fi, BLE, or LoRa. See IoT device protocols for ranges and trade-offs (LoRa for far outdoor sensors, Zigbee/Thread indoors).
    • A platform integration — GARDENA, Rachio, Ecowitt, Home Assistant, and more. See the integration guide.
  3. Assign the sensor to a garden (and optionally a bed), name it, and set its location. It now streams readings.

Watch the data#

  • Sensors (/sensors) — all devices, current values, and battery levels.
  • Sensor detail (/sensors/:id) — one device's live + historical readings.
  • Visualization (/sensors/visualization) and History (/sensors/history) — charts and trends over time.
  • Monitoring (/sensors/monitoring) — a live overview across devices.

Get alerted#

Alerts (/sensors/alerts) lets you set per-sensor, per-metric thresholds (e.g. "soil moisture below 25%", "temperature above 32°C"). When a threshold is crossed you're notified by your chosen channels (email/push), with severity (info/warning/critical) and escalation if it goes unacknowledged.

Calibrate & maintain#

Each sensor tracks a calibration timestamp and battery level; recalibrate from the device page to keep readings trustworthy. Malformed or out-of-range payloads are rejected so a faulty device can't corrupt your history.

Next#

Turn readings into action: set up rules so low moisture opens a valve, or heat opens a vent — see Automation.